Award Programs > Pinnacle Awards > 2013 Winners Awarded February 1,2014

Pinnacle Winner banner

Pinnacle Home | Eligibility & Evaluation | Publicity for Winners | Winners Hall of Fame | Previous Winners

2013 Pinnacle Award Winners

Pinnacle Winners Advance Construction and Enhance the Carolinas!

On February 1, 2014, Carolinas AGC bestowed the 2013 Pinnacle Awards - the most prestigious recognition in the Carolinas construction industry - to five projects and an individual. The CAGC Pinnacle Awards shine a light on our profession in a very public way, and help promote our organization's very reason for existence, as expressed in CAGC's mission statement: Advancing the construction industry to enhance the quality of life and deliver a sustainable difference in the Carolinas.

The CAGC Pinnacle Awards competition is co-sponsored by CPA firm GreerWalker LLP and the law firm of Johnston, Allison & Hord, both based in Charlotte. The Pinnacle presentation was made at CAGC's 93rd Annual Convention in Boca Raton, Florida.

BUILD WITH THE BEST

Our Build With the Best Award honors the contributions of a non-contractor to the betterment of the construction industry and the overall Carolinas economic welfare, whether from outside the industry altogether or from our own supplier/service company membership sector.

North Carolina Representative Mike HagerNC Representative Mike Hagar, House Majority Whip
House Majority Whip

Mike Hager is a self-employed engineer who represents Rutherford and Burke Counties for the Republican Party.

Hagar is credited for his leadership on NC General Assembly House Bill 476, the rewrite of the state's underground safety/damage prevention laws. The new law, effective October 2014, will move North Carolina from one of the weakest states concerning underground safety and damage prevention to what some say will be the model state program. It will save lives, minimize injuries and protect the public as well as underground facilities. Passage of this complex legislation in North Carolina was a top legislative goal for Carolinas AGC. The bill passed the NC House and Senate unanimously.

CAGC salutes Rep. Hager for his efforts in advancing the construction industry.

BEST HIGHWAY PROJECT (1st of 2 Awards)
 

Safety Improvements to 13 Separate Intersections in Central South Carolina

Prime Contractor: C.R. Jackson, Inc., Columbia SC

This federal aid design-build intersection safety projectinvolved 13 intersections across Aiken, Clarendon, Lexington, Orangeburg, Richland, and Sumter counties. C.R. Jackson was responsible for design, permitting, right of way acquisition, utility relocation coordination, and construction - for all 13 projects, under one contract, in a very condensed timeframe.

This application of the design-build procurement method for a bundle of safety related projects was a first by the SC Department of Transportation (SCDOT). Its goals were to ultimately qualify for Federal Safety Funds via data-driven analysis, and validate that design-build is a viable option for projects of this nature in the future.

More info...

Using current SCDOT statistical value, accidents over a three-year period for these 13 intersections had cost more than $13 million in property damage and injuries plus loss of life. The average anticipated accident reduction for these improved intersections is 45 percent. Completing these projects in just 18 months rather than the conventional 36 months represented a saving to taxpayers of over $2.9 million - and an estimated $2 million in each future year.

Project management on 13 simultaneous work sites-- many with ongoing traffic patterns-- on an aggressive schedule presented unique challenges that required significant resourcefulness.

  • Coordinating with other companies and agencies, such as assisting utility providers in knowing where their lines were, to help save on relocation costs.
  • Flexibility to accommodate a very long list of uncontrollable items they couldn't generally influence, such as 97 different property acquisitions requiring a minimum of 120 days each.
  • Creativity in deploying logistically located resources (workers, equipment, three asphalt plants, and subcontractors) across 13 sites separated by 150 miles.

With more than 100,000 total man hours logged, C.R. Jackson reported no lost time incidents and no construction related accidents. And, all 13 intersections were substantially completed within original budgeted construction time and within budget.

(See original complete project entry)

Close

BEST HIGHWAY PROJECT (2nd of 2 Awards) Lane ConstructionFlatiron Construction

The I-85 Yadkin River Bridge, Salisbury, NC

Lead: The Joint Venture of Flatiron/Lane
Partners in Excellence: STV/Ralph Whitehead, Charlotte, NC, HDR Engineering, Raleigh, NC

STV ConstructionHDR Engineering

This project replaced a severely deteriorated, 60-year old bridge eight months ahead of schedule and $44 million below the owner's budget. NCDOT's RFP required great resourcefulness from the design-build team, as the bridge crosses five current and future railroad tracks, carrying 60 trains per day, including freight rail, Amtrak, and a future high speed rail.

More info...

The team's Maintenance of Traffic plan was key-- accelerating an intermediate milestone to open the northbound mainline bridge and temporarily shift both northbound and southbound traffic onto it. The team also saw that by slightly widening the median from 46 feet to 70 feet, they could construct a single work bridge in the center median instead of the two called for in the RFP. This choice not only accelerated the schedule and reduced the total cost, but also reduced the environmental impacts to the stringently monitored wetlands on the site.

The project team worked an impressive three and a half years without any Notice of Violations (NOVs), a huge accomplishment on a project surrounded by environmentally sensitive areas. At its peak, more than 200 people worked 24-hours a day, six to seven days a week. Crews finished the half-mile bridge in roughly 14 months.

Governor Perdue photoThis was a very high profile project, visited by the media, Governor Bev Perdue, and top state transportation officials multiple times. State officials used federal stimulus money to set aside $180 million to build the bridge, and funding also came from a mobility fund Gov. Perdue proposed in 2010. This project's success helps bolster the notion of what can happen when transportation projects are adequately funded.

 

 

(See original complete project entry)

Close

BEST UTILITY PROJECT

R.B. Simms Water Treatment Plant and Lake Blalock Improvements Crowder Construction Company

Lead: Crowder Construction Company, Charlotte, NC
Partners in Excellence: URS Engineering, Morrisville, NC; Constantine Engineering, Charleston, SC

URS EngineeringConstantine Engineering

Spartanburg Water System (SWS) was looking to ensure an adequate water supply for at least two generations, and identified nearly $44 million in technological and electrical improvements. However, their budget was only 2/3 of that figure. They proceeded with an "alternate delivery method" - a first for this owner, letting it as a qualifications-based progressive design-build project. Not only was the project successfully completed safely with no interruption in service and on schedule, it was completed under budget. 

More info...

It was important to utilize as much of the existing facility as possible to minimize construction and environmental harm, as well as incorporate sustainable design practices. The team's work included:

  • Eliminating the need for chlorine gas disinfection, which had been a major health concern to the surrounding community
  • Providing a new chlorine dioxide generation system that reduced the potential formation of by-products and improved water quality
  • Enabling SWS to generate its own sodium hypochlorite solution, which reduced the carbon footprint and saves on long-term operations costs
  • A reduction in the amount of waste that previously went to landfills
  • A new pump station that allows for recycling of decant water, thereby reducing the volume discharged under the NPDES wastewater discharge permit and the amount of raw water required.

The project was completed with zero lost workdays and zero restricted days. Crowder's site-specific safety plan resulted in 129,501 man-hours worked and only one recordable accident.  

 

(See original complete project entry)

Close

BEST BUILDING PROJECT (1st of 2 Awards)LeChase Construction

Duke University Baldwin Auditorium Renovations, Durham, NC

Lead: LeChase Construction Services, Durham, NC
Partners In Excellence:: Brown Brothers Plumbing & Heating Company, Durham, NC
Comfort Engineers, Durham, NC

Brown Brothers Plumbing & Heating CompanyComfort Engineers

The transformation of Baldwin Auditorium into an acoustically superior world-class musical venue was a LEED® silver registered project. The existing venue had poor acoustics, and the LeChase team virtually remade it - changing the very shape of the interior, redesigning and relocating mechanical equipment configuration, and renovating the unusual coffered dome. Those were complemented by a focus on intricate structural modifications and special finishes, all through an intricate sequenced process.

The team added wall and floor mass to create an acoustically superior shoe-box shape. To maximize acoustic efficiency, all walls were angled, curved or shaped to avoid parallel surfaces.

More info...

  

While dome shapes are not typically desirable for acoustic excellence, the coffered dome of Baldwin was an aesthetic masterpiece which Duke University wanted to retain. A substantial scaffolding system was engineered to create a "dance floor" high above the finished floor elevation promoting safe access for new plaster finishes, acoustical coffer installations, sprinkler, lighting, carpentry and paint applications. One-half of the dome required reflection of sound while the other half required absorption, but both halves were required to appear identical.

A common complaint of Baldwin patrons had been noise and vibrations of the mechanical equipment located directly below the auditorium. The new system allows air to permeate upward through 75,000 minute holes drilled in the stage floor to gently rise and cool/warm onstage performers. More than 250 swirl-air diffusers in the floor and under the seating area provide low pressure air to the audience. The result was zero vibration and silent delivery of conditioned air to the auditorium.

For the balcony extension, steel columns along with horizontal beams and corrugated metal decking were rigged inside, through window and door openings, then into final vertical position via a small, high capacity crane that is one of just a few in the US.

Numerous installations required detailing beyond the capability of two-dimensional drawings. The millwork scope, in particular, required furniture grade perfection. Balcony railing and the orchestra shell required curved components in three dimensions. Each piece was modeled using Building Information Modeling (BIM) technology and a component was selected for mock construction. Each mock construction piece was reviewed and retained to the end of the project to ensure the target level of quality.

(See original complete project entry)

Close

BEST BUILDING PROJECT (2nd of 2 Awards)

H. M. Kern CorporationThe Chatham County Courthouse, Pittsboro, NC

Lead: H.M. Kern Corporation, Greensboro, NC
Partner in Excellence: Meckworks Mechanical Contractors, Greensboro, NC

Meckworks Mechanical Contractors

The Historic Chatham County CourthouseThe historic Chatham County Courthouse, known to thousands as Chatham County's front porch, burned March 25, 2010. Carolinians and history buffs held their breath waiting to hear if it could be salvaged.

The entire roof structure and clock tower had burned through to the lower floors, which collapsed. While it was determined that the remaining masonry structure could be salvaged, the skeleton would require "kid glove treatment" in refurbishing damaged exterior brickwork.

More info...

Historic Chatham County Courthouse Photo of Fire in 2010

The top of the walls were drilled and doweled with rebar and the walls capped with new masonry and concrete to extend higher. Thus, the new upper floors are "in part" supported today by the original masonry walls installed in 1881. A system of fans was placed in the building to help dry out the interior masonry walls; the building remained undisturbed for almost a year during this dry-out.

Once underway, interior reconstruction included a new steel-framed roof system, interior concrete floors, extensive millwork and all new finishes. Parts of the building would be returned to their original appearance, with remaining historical materials protected. Of course, the renovation also included installation of a fire suppression sprinkler system.

Debris removal was tedious, and all pine flooring and beams not permanently damaged were carefully removed and salvaged. To keep as much original detail as possible, modern HVAC, electrical sprinkler and plumbing systems were installed in 130-year-old areas not designed for such systems, often requiting customization. H.M. Kern's partnership with Mechworks was key.

Among the project's unique safety threats, the Courthouse is located in the center of town, in the middle of a traffic circle, with continual traffic from two major NC highways bustling around it.

From the start, H.M. Kern entered into an agreement with OSHA's consultation services to ensure the safety of not only its workers but also the public, who became eager spectators as the project progressed. The result was no injuries, fatalities or citations.

(See original complete project entry)

Close

Thank you Sponsors!
GreerWalker LLP, and Johnston, Allison & Hord, provide not only financial assistance, but considerable time managing our judging process as well.

Johnston, Allison & Hord Attorneys LogoGreer & Walker, LLP Logo

 

 

 

  Free Member Publicity
  Advertising & Sponsorships
  Award Programs
  Networking Opportunities
  Opportunities for Individuals
  Learning & Teaching Opportunities